Home » DJI drone 360 panos? Make them with Lightroom, ICE and Photoshop!

DJI drone 360 panos? Make them with Lightroom, ICE and Photoshop!

Make superior drone 360 panos

If you have a DJI drone, the chances are that you can create 360 spherical panos like this

It’s remarkable what cameras can do these days, and where they can go. Drones can now take your view hundreds of feet into the air. In this article I explore how familiar photographic software tools from Adobe, Photoshop and Lightroom, can also rise – with drones – to the task, especially when things don’t quite go to plan at altitude.

Drone panorama potential

DJI’s Spark selfi-drone, though it’s much more than that.

Some camera drones, like my own DJI Spark, can produce amazing panoramas shot from high in the sky. The Spark may only be DJI’s simplest and cheapest drone that has a passable camera on board, but it can shoot vertical, horizontal and spherical panoramas, including full 360 degree spherical panos. Actually, that’s not quite correct because the Spark’s camera can’t be tilted upwards, not all the sky above the drone can be captured. For that you need a Parrot Anafi drone. But I’ll show you how to work around that later in the article.

Stitching dozens of automatically shot views

With the Soark spherical panos are assembled from no less than 46 individual 12 megapixel shots. That’s over 550 million pixels. The Spark dutifully executes each shot automatically and the process takes about a minute and a half while hovering in. The amount of potential in all those pixels is mind-boggling, but mostly superfluous for the most-used application of panos like these – posting to Facebook! I’ll show you how to condense all that image data down to a 9 megapixel JPEG that will look stunning online.

DJI’s own GO app, which controls the drone while it’s in flight, can create a 4096×2048 pixel spherical pano JPEG, but it’s heavily compressed. Your smartphone or tablet needs to be connected to your Spark, which must be powered up, in order to run the stitching process. There is also little avenue for convenient adjustment of those 46 images beforehand, which is a key point because it’s quite easy to end up with a pano that is too dark or too light.

Bad exposure? Lightroom to the rescue!

If you aren’t familiar with Lightroom or similar photo editing workflow applications, one of its fundamental benefits is in enabling you to knock a lot of similar images into shape very quickly. In my example the 46 images that my Spark produced were quite badly under-exposed. When you start the process to capture those images the drone’s camera will freeze the exposure, which is what you should do when shooting to stitch multiple shots. The problem is that the exposure value that gets frozen is often based on what the drone sees when it’s not pointing at the most interesting part if the view below. If the sun is in direct or partial view, the exposure compensates and everything else will be too dark. When you’re concentrating on keeping your quadcopter in the air, details like this can be easily overlooked.

Here we have imported the 46 Spark images into Lightroom. Don’t despair if your pre-stitch component pano images are under-exposed; they can be recovered. You might even want to do this deliberately to avoid blown highlights in the sky. However, recovering from over-exposure may be much more difficult.

With Lightroom you choose the most important of the 46 images to be stitched, take as long as you need to adjust it until it’s perfect, then select all the others and synchronise the adjustment settings. In seconds, the previews of all 46 images will be updated. Adjustments you can make include brightness, contrast, shadow brightness, highlight retrieval, colour balance, sharpness, and much more. You can even adjust the density of selected hues, so you can independently darken the blue in the sky, if required.

Choose an image that represents the main area of interest. After some tweaks to exposure, contrast, and histogram manipulation we have a dramatically improved view. But there is more we can do.
The sky was a little lacking in colour so I have located the colour adjustment tool and carefully reduced the luminance of blue in the picture. This has really brought out the blue behind the clouds.


Once you are happy with adjustments made to that key image, apply the same changes to all the other 45 images in one go using the Lightroom adjustment settings synchronisation tool. Don’t sync parameters that are specific to individual frames, like any retouching, for example.


Now all 46 images are ready to be exported and stitched in Microsoft ICE.

Create a new set of corrected images to be stitched

By now you can see what your corrected images will look like when rendered, but they don’t yet exist as replacement image files ready to be stitched. But Lightroom can create the new files in no time. Beforehand you may choose to reduce the dimensions of these files because there is no need to stitch 12 megapixel components and the process may well tax your computer depending on its specification.

The cool ICE app from Microsoft Research

Lightroom, itself, can stitch images to create panoramas, including spherical types, but its automated alignment sometimes fails to arrange Spark component images correctly. Therefore, I recommend you use a free application from Microsoft Research, called ICE or Image Composite Editor. This is a very powerful program that can do a lot of very clever things but, thankfully, for our needs here, you barely have to adjust any settings, so it’s easy to use. I recommend choosing an output pixel size of 6000 across.

Stage 1 stitching the Spark’s 46 composite images in Microsoft ICE


This is what you see after Microsoft ICE has completed its stitching process to create a flat 2-D view of the 360 panorama. The curly edges will be cropped flat in the next stage.


Here is the completed ICE-stitched image. I’ve resized it down to 6000 pixels wide. The final image will be 2:1, or 6000×3000 but as you can see here the height is currently only 2193 pixels because the Spark can’t tilt its camera upwards to capture all the sky above it. This will be cleverly faked and added in Photoshop using Content-Aware Fill.


ICE stitches your 360 degree view into a two-dimensional flat JPEG image. By convention, the flat view should have an aspect ratio of 2:1. But you will notice that the shorter dimension is smaller than half of the (6000 pixels) longer dimension. This is because, if you recall, the drone can’t point its camera upwards enough to capture all the sky above it. But we can fix it!

Create the missing sky and export a Facebook-ready spherical pano in Photoshop

Load the flat view image into Photoshop CC. Use the Photoshop Canvas Resize tool to increase the vertical size of the image to 3000, by extending the top only. This brings the image to the required 2:1 aspect ratio (6000×3000). The extension, however, contains no sky. Fortunately, Photoshop’s Content Aware magic can be used to convincingly fake the missing sky based on the existing sky. Use the auto selection tool to mask the blank area and then right-click and choose Content Aware Fill. Execute this and after a couple of seconds the blank area will be filled with missing sky.

From ICE we move to Photoshop.


We’ve used the Canvas Resize tool to add the missing sky area so the entire 2-D image is now 2:1 or 6000 pixels by 3000. Next we blend in some sky.


The blank area at the top has been selected and then simply right-click and choose Content-Aware Fill and OK.


Voila, Adobe Content Aware magic evaluates the existing image and the sky and creates a convincing artificial extension.


Final stage – save as an identifiably spherical pano image file

For 3D panoramic viewers to be able to show your spherical pano as intended, a version of the file needs to be created with the required meta tags embedded. To do this go to the 3D  menu in Photoshop and select ‘New Panorama Layer from Selected Layer’. The flat view will then change to a navigable 360 view that you can explore by pushing and pulling with your mouse. Finally, again from the 3D menu use Export Panorama – and you’re done.

Next the image has to be converted into a recognisable 360 spherical pano, so from the 3D menu in Photoshop create a new panorama from the loaded image (layer).


Once the new pano stage has been completed the view changes to a navigable 3D 360 view.


Finally, the completed 360 pano can be exported and you’re done!

The resulting file can be shared to Facebook and other sites set up to view 360 spherical panoramas. It can also be used in some apps to create other types of 360 view, like so-called ‘tiny planets’ and 360 transformation animations.

I personally find that Facebook’s viewer adds too much perspective. This can probably be compensated for and I will be looking into that. If you look at the view on this page, it’s much better, as is the way the view is handled on, for example, Google Photos.

That’s it for now – why not use the comment section below to link to your own 360s?





Please follow and like us:

Notify of